Hydraulic Straightening Press

SANTEC now offers a special solution in the whole field of straightening technology for Round, Flat& profile materials.

'SANTEC Hydraulic Straightening Press are compact, most technically advanced with all latest features as per International Standards. Its classic design & easy stroke control operation makes it popular in the market.

Ram movements & pressure are controlled by this simple time-tested, sensitive lever control. The ram can be advanced to the work & make contact with a feather touch.

Further downward pressure on the lever increases the pressure on the work proportionally release of the lever release pressure. Users can straighten work to close tolerances. The operator prefer this control because it provides a feel of work done on the job. Over travel mistakes are avoided & damage to work is prevented. A push button engages the left hand during straightening.

Straightening Process Description
The skilled operator manually loads the part/job into the Straightening Press & clamps the part in centers (or on rollers). The part is then rotated manually to measure the straightening using dial indicators & the high point is rotated up. The operator will then depress the hand lever, which brings the ram down to the part causing the part to flex. The depth of the stroke is adjusted using the fine stroke adjustment on the hand lever. After each stroke, the dial indicator will show how much the Straightness of the part has changed so that the operator can increase the depth of stroke untill the straightness is within customer's tolerance range. This process is repeated at operator determined points along the workpiece as necessary to achieve the specified straightness orTIR (Total Indicated Runout)